Hey, I'm sorry if some of these questions are 'nooby', but I don't really know much about all the new RS stuff, since I only came back to RS a couple of weeks ago (Quit May 2007). Anyway I'm gonna be getting a few money skills to 99 after I get 99 WC and FM in a few days and was wondering what the best way to go about this is. I only have 400 mil and don't feel like destroying my bank, so I'm not looking for the absolute fastest method, but a good balance between EXP and cost.
So here are my questions:
Construction:
1. What's best to make basically, is it oak lardors? An Estimate of EXP per hour would be really helpful to if you know it, so I can work out if SC hammers are worth it.
Crafting:
2. Should I make green d-bodies, and how many of these can you make per hour (or what is the exp /hr, so I can figure out if SC needle is worth it).
Smithing:
3. This one I'm really not sure about, I was told I should make adamant platebodies and use SC hammers, but the person who did that did it many months ago before addy bars got extremely expensive. If somebody could suggest things to make, and the approximate exp / hours of these methods (and costs) I'd appreciate it alot. I'm really looking to keep the cost of this under 100mil, and would much prefer it if I could have that cost 50-70mil, as long as it didn't comprimise exp rates too much.
Thanks for reading this, and I'd be really thankfull if somebody could help me out here :).
Page 1 of 1
Smithing, Crafting, Construction Questions.
#2
Posted 07 November 2009 - 10:34 AM
hourus0, on 07 November 2009 - 11:13 AM, said:
Smithing:
3. This one I'm really not sure about, I was told I should make adamant platebodies and use SC hammers, but the person who did that did it many months ago before addy bars got extremely expensive. If somebody could suggest things to make, and the approximate exp / hours of these methods (and costs) I'd appreciate it alot. I'm really looking to keep the cost of this under 100mil, and would much prefer it if I could have that cost 50-70mil, as long as it didn't comprimise exp rates too much.
3. This one I'm really not sure about, I was told I should make adamant platebodies and use SC hammers, but the person who did that did it many months ago before addy bars got extremely expensive. If somebody could suggest things to make, and the approximate exp / hours of these methods (and costs) I'd appreciate it alot. I'm really looking to keep the cost of this under 100mil, and would much prefer it if I could have that cost 50-70mil, as long as it didn't comprimise exp rates too much.
I'll help by answering part of your post.
Smithing the plates can make you over 200k exp per hour if you concentrate.
Addy bars are 3,037 each and you'll need 5 of them per body. That comes up to the cost of 15,185 each. On the GE they sell for 9,782 each, or you can alch them for 9,984 each.(Natures are 313 each, so you'll lose money by alching, but you can get rid of your plates faster.) Your looking at losing 5,403 each.
Since you have to make 27,676 plates for 88-99 it will cost you 150m, but if you use SC hammers it will cut that price in half. 13,838 plates will cost you roughly 75 mil. Good luck with your goal.
#3
Posted 07 November 2009 - 10:46 AM
I made Oak Larders for Construction when I trained to 70, using the SC tools which heavily boosted my xp gains. I'd personally recommend that method, good luck with your goals.
#4
Posted 07 November 2009 - 11:29 AM
For Construction, it should cost you about 35M with SC hammers, dependent on whether you use a Butler or Demon Butler. Buy oak logs, note them, and go to your house. Use them on the butler, and tell him to unnote them. When he gets back, send him to the sawmill. Then when he gets back send him to unnote again. Meanwhile, start building. Then send him to the sawmill, build, repeat. Make larders until 74, then Dungeon doors to 99. I'm less sure about the other two, but you could make molten glass into unpowered orbs. Not too expensive last I checked, and 80k+ experience/hour, last I checked.
Hope this helped, welcome back and good luck.
~The
Hope this helped, welcome back and good luck.
~The
Page 1 of 1

Sign In
Register
Help

MultiQuote




